!important;

Micro-JST-1.25 pigtail

27   |  
After flying the Nano QX or Inductrix for a while, the connectors may lose their shape and that results in loss of performance or dropouts. Here is the fix: a better plug, and 10cm high quality silicone cable.
Remove the old power connector straight off the board, and solder this pig tail in its place!

Customer Reviews

Based on 27 reviews
5 Star
100% 
27
4 Star
0% 
0
3 Star
0% 
0
2 Star
0% 
0
1 Star
0% 
0
Write a Review Ask a Question
  • Reviews (27)
  • Questions (3)

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!
B
04/21/2018
bodeen
Florida

Nano CP S fixed!

My CP S would drop and crash then spool in 3D mode until the battery was disconnected. HH said my ESC was bad but it turns out their stock pigtail was no good. My opinion it was never any good. I had to solder one of the wires back to the ESC and it was difficult to connect and disconnect. The Micro JST 1.25 from MM is far better quality and clicks into place easily. The power is back and the heli isn't twitching anymore.

Y
02/28/2018
Yang
Sydney, Australia

This will transform your Nano CP S!

For some time my Nano CP S didn't perform well like when it was new. I bought new lipos, replaced motors, still didn't help. The motor feels boggy, the power wasn't consistent, and the flight time was reduced. Not until I found this high quality connector, After I soldered it to the main board, my nano has transformed! The motor sounds very smooth and less boggy, power is more consistent, and flight time has improved. 5/5

CM
01/16/2018
Claude M.

Comme promis!!!

De meilleur qualité que l'original!! Les délais de livraison sont excellent, moins de 8 jours pour faire le trajet jusqu'au Québec!!!!

AN
12/28/2017
Amy N.

JST 1.25 pigtail

Good quality, good shipping time, easy-peasy!

JT
12/08/2017
Justin T.

Fixed

Fixed my power issues on my old Tiny Whoop

Copyright © 2018 Micro Motor Warehouse